Rossmax NL100 piston nebulizer

Rossmax NL100 piston nebulizer

✓ MMAD (particle size) ≤ 3.8 μm; proportion of fine particles (FPD) 70 - 75 %.
✓Consistent fine particle size for efficient respiratory treatment 
✓ Ideal for children and adults. 
✓ Very compact and light. 
✓ Dispersion ≥ 0.20 ml/min. 
✓ Mouthpiece and masks for adult and child included

The compact piston nebulizer Rossmax NL100 is the perfect companion due to its compact dimensions and effective way of managing and treating respiratory conditions anywhere and anytime.

With a spray rate of ≥ 0.20 ml/min and a consistent particle size, NL100 is optimal for use in the treatment of asthma, COPD and other respiratory conditions requiring aerosolized medication during therapy. Provides comprehensive, effective and convenient care for common respiratory conditions.

With proper maintenance and use, this nebulizer will serve you for many years with its reliable treatments. This device is powered by standard AC power. It is ideal for all ages due to fast, safe and practical treatments.

The nebulizer is intended for the treatment of asthma, chronic obstructive pulmonary disease (COPD) and other respiratory problems, the therapy of which requires medication in the form of an aerosol mist. Please consult your doctor and/or pharmacist to find out if your prescribed medication can be used with this inhaler. In order to find out the type, dose and method of taking the medicine, follow the instructions of your doctor.

Rossmax NL100 piston nebulizer parts

1. Nebulizer Kit

2. Nozzle

3. Angled Mouthpiece

4. Air Filter

5. Child Mask

6. Adult Mask

7. Air Tube

8. Air Output

9. Air Filter Slot

10. Air Intake

11. Power Cord

12. Power Switch

Assembling your nebulizer kit:

Always unplug the compressor and make sure the powerswitch is turned to the “OFF” position before cleaning, assembling and before or after each use.

1. Place the compressor on a flat, stable surface within reach.

2. Gently twist and pull straight up on the lid of the nebulizer kit to separate into two parts (medication cup and cover).

3. The stem inside the medication cup inserts into the tube of the nozzle.

4. Add the prescribed amount of medication to the medication cup.

5. Reassemble the nebulizer kit by carefully twisting the medication cup and cover together. Make sure that the two parts fit securely.

Handling the NL100 nebulizer:

The nebulizer kit is operable at up to a 45° angle. If the angle is greater than 45°, no aerosol will be generated.

1. Attach one end of the air tube connector to the air output.

2. Carefully attach the opposite end of the air tubing connector to the stem at the base of the nebulizer kit.

3. Attach the angled mouthpiece or mask to the top of the nebulizer kit.

4. The capacity of the medication cup is 6 ml.

NOTE: A 30-minute interval is recommended after each use.

The compressor will automatically shut off if it becomes overheated. If / when this happens, immediately:

1. Press the power-switch to the “OFF” position.

2. Unplug the power cord from the outlet.

3. Allow the motor to cool for 30 minutes. Before restarting the unit, make sure that the air vents are not obstructed.

After every use:

1. Unplug the unit from the power source.

2. Allow the unit to completely cool.

3. Carefully detach the air tubing from the nebulizer and pour out any remaining medication.

4. Follow the cleaning procedures (see enclosed manual)