Rossmax X3 Automatic blood pressure monitor

Rossmax X3 Automatic blood pressure monitor

Free shipping
1790 Ordered

✓  Movement Detection
✓  Cuff Detection
✓  Hypertension Risk Indicator
✓  Irregular Heartbeat Detection (IHB)
✓  Average of Last Three Readings
✓  120 Memories for 2-users With Date and Time Indication
✓  Guest Mode
✓  One-Touch Automatic Operation
✓  Latex-Free Patented Universal Cone Cuff
✓  Cuff Holder Design
✓  Large LCD Display; 57 x 73 mm
✓  Adapter Socket
✓  Lifetime Calibration

Manufacturer Rossmax
Warranty 5 godina
In stock

129 pieces on stock

Najniža cijena u zadnjih 30 dana: €59.89


Includes a 5 year Warranty and Certified Service with a Free Lifetime Calibration!


Detekcija manžete  Detekcija pokreta  Indikator rizika od hipertenzije  Prosjek zadnja tri očitanja  120 memorijskih mjesta za 2 korisnika s datumom i vremenom  Mogućnost mjerenja za treću osobu  Automatski rad pritiskom na jednu tipku 

Patentirana univerzalna manžeta u obliku stošca bez lateksa  Držač manžete  Veliki LCD zaslon | 69 x 78 mm  5 godina jamstva i doživotna kalibracija  According ESH Protocol  BHS Listed
This unit uses the oscillometric method to detect your blood pressure. Before the cuff starts inflating, the device will establish a baseline cuff pressure equivalent to the air pressure. This unit will determine the appropriate inflation level based on pressure oscillations, followed by cuff deflation. Any muscle contraction during the measurement period will cause faulty results. During the deflation, the device will detect the amplitude and slope of the pressure oscillations and thereby measure the systolic blood pressure, diastolic blood pressure and pulse.
If the cuff has been wrapped too loosely, it may cause unreliable measurement results. The “Cuff Wrap Detection” can help to determine if the cuff has been wrapped snugly enough. The specified icon appears once a “loosen cuff” has been detected during measurement. Otherwise the specified icon appears if the cuff is wrapped correctly during measurement.
The “Movement Detection” helps reminding the user to remain still and is indicating any body movement during measurement. The specified icon appears once a “body movement” has been detected during and after each measurement. This detection system reminds the user to remain still and therefore increases the accuracy of the measurement.

Note: It’s highly recommended  to redo the measurement if the icon appears.

This monitor has a single-time measurement without storing function. Press the User-Switching key  (on the right) to select the "guest" memory zone, and follow the Measurement Procedure to take a measurement correctly. When the measurement has been completed, the measurement value will not be stored in memory zone.
The World Health Organization classified blood pressure ranges into 6 stages. This unit is equipped with an innovative blood pressure risk indication, which visually indicates the assumed risk level (optimal / normal / high-normal/ grade 1 hypertension / grade 2 hypertension / grade 3 hypertension) of the result after each measurement.
This unit is equipped with an Irregular Heartbeat (IHB) Detection which allows those who have an irregular heartbeat to obtain accurate measurements alerting the user of the presence of an irregular heart beat during the measurement.
Note: It is strongly recommended that to consult with the physician if the IHB icon appears too often.

Blood pressure measurements determined with X3 are equivalent to those obtained by a trained observer using the cuff/stethoscope auscultation method, within the limits prescribed by the American National Standard, Electronic or Automated Sphygmomanometers. This unit has been designed for use by adult consumers in a home environment. Not suitable for infants or neonates. X5 is protected against manufacturing defects by an established International Warranty Program. For warranty information, contact the manufacturer, Rossmax International Ltd.


1. Unwrap the arm cuff, leaving the end of the cuff through the D-ring of the cuff.
2. Put your left arm through the cuff loop. The color strip indication should be positioned closer to the user with the tube pointing in the direction of your arm.
3. Turn your left palm upward and adjust the edge of the arm cuff at approximately 1.5 to 2.5 cm above the inner side of the elbow joint. 
4. Center the tube over the middle of the arm.
5. Properly connect the cuff. Allow room for two fingers to fit between the cuff and your arm. Position the artery mark over the main artery (on the inside of your arm)

Note:  Locate the main artery by pressing with 2 fingers approximately 2 cm above the bend of your elbow on the inside of your left arm. Identify where the pulse can be felt the strongest. This is your main artery.


✓  Batteries
✓  Latex-Free Patented Universal Cone Cuff
✓  Instruction Manual
✓  String Bag
✓  Adapter (Optional)


Instruction Manual for Rossmax X3 Blood Pressure Monitor.

Product Flyer for Rossmax X3 Blood Pressure Monitor

How to Use Rossmax X3 Blood Pressure Monitor - See Instruction Video Below

Technical specifications

Measurement Method: Oscillometric
Measurement Range: Pressure: 30~260 mmHg; Pulse: 40~199 beats/ minute
Pressure Sensor: Semi conductor
Accuracy: Pressure: ± 3 mmHg; Pulse: ± 5% of reading
Inflation: Pump Driven
Deflation: Automatic Air Release Valve
Memory capacity: 60 memories for each zone x 2 zones
Auto-shut-off: 1 minute after last key operation
Permissible Transport Temperature and Humidity: -10°C~60°C (14°F~140°F); 10%~90% RH; 700~1060 hPa
DC Power Source: DC 6V four AAA Batteries
AC Power Source: DC 6V, ≥600mA (Plug size: outer(-) is Ø4.0, inner(+) is Ø1.7)
Dimensions: 96 (L) X 139.7 (W) X 63.2 (H) mm
Weight: 241.5g (G.W.) (w/o Batteries)
Arm Cuff circumference: Adult: 24~40 cm (9.4”~15.7”)
Limited Users: Adult Users
IP Classification: Type BF, IP21

PC Link (Optional)

Write Your Own Review
Rossmax X3 Automatic blood pressure monitor
2017 - 2024 © Kvantum-tim d.o.o.