Rossmax GD-102 Palm-type sphygmomanometer with stethoscope

A classic spygmomanometer made by the renown Swiss spyhgmomanometer manufacturer Rossmax. Blood pressure measurements taken by this home-use sphygmomanometer are equivalent to those obtained by a medical technician using a cuff/stethoscope auscultation method.

GD 102 is exclusively designed for blood pressure measurement at the upper arm or thigh on a healthy skin.

GD 102 is distinguished by the following features: 

Superior performance and quality

Big 65mm face dial, easy to read.

Single-hand operation, the manometer and the pump constitute a single piece.

Non-stop pin reliable manometer.

Latex-free cuff

The device comes with the following:

• - D-ring cuff;
• - Single-head stethoscope

Cuff

• Fits the shape and circumference of an arm approx. 24-36 cm
• Other cuff sizes available on demand.

Warranty: 5 years

Laws and Directives:

Palm Type Aneroid Sphygmomanometer complies with European Regulation underlying the Medical Device Directive and bears the CE mark “ CE0120” . The quality of device has been verified and conforms to the provisions of the EC council directive 93/42/EEC (Medical Device Directive) Annex I essential requirements and applied harmonized standards.

EN ISO 81060-1: 2012 Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type.
To ensure accurate measurements, this monitor is recommended to be re-calibrated every two years at our certified service.

How to measure blood pressure?

Applying the Cuff

1. Place the cuff over a bare upper arm, wrap it with the tube pointing at your palm, and the artery mark over your main artery.
2. If the index line is within the arm circumference range, the cuff size is adequate. In any other case, use a different size cuff. The edge of the cuff should be at approximately 1.5 to 2.5 cm above the inner side of the elbow joint.
3. Using the correct cuff size is important for an accurate reading.

Measurement

1. Place the stethoscope head over the main artery, underneath the artery mark of the cuff.
   
2. With the valve closed, press the bulb and continue pumping to a value 20-30 mmHg above your normal blood pressure.
3. Open the valve to deflate the cuff gradually at a rate of 2-3 mmHg per second
4. ORecord the onset of Korotkoff sound as the systolic pressure, and the disappearance of these sounds as diastolic pressure
5. After measurement is completed, fully open the valve to release any remaining air in the cuff.

Downloads

Documents

Product Flyer (EN)

User manual (EN), User manual (HR)

Blood Pressure Log (EN)

Video Instructions

Understanding Blood Pressure (EN)

Checking Your Blood Pressure with a Sphygmomanometer (EN)

Rossmax Promo-Showcase (EN)

Educational video on Atrial Fibrillation (AFib) (EN)

Educational Video on Premature Contractions (EN)

Educational Video on Bradycardia (EN)